評論
打印
Part 21 LIFEBOATS AND LIFERAFTS
第21部分 救生艇筏
1.Check launching tracks.
1.檢查放艇滑道。
2.Check working parts.
2.檢查工作部件。
3.Securing of No. 1 lifeboat is not in corrcct position.
3.1號艇的固艇索不在其位。
4.Securing of No.l lifeboat is damaged.
4.1號艇固艇索損壞。
5.Fuel tank of No. 1 lifeboat is full.
5.1號艇的燃油箱已裝滿。
6.Oil level of No.2 lifeboat engine is normal.
6.2號艇發動機燃油油位正常。
7.Operate lifeboat engine.
7.啟動救生艇發動機。
8.No. 1 lifeboat engine is not operating yet.
8.不，1號艇發動機還沒有啟動。
9.Bilge pump in No.2 lifeboat is not operational yet.
9.2號艇污水泵還沒有工作。
10.Check slip gear in lifeboat.
10.檢查救生艇自動脫鉤設備。
11.Slip gear in corrcct position and secured
11.自動脫鉤設備在其位并安全工作。
12.Test ccrtificate of launching gear is expired.
12.放艇設備檢驗證書已經過期。
13 Launch No.2 lifeboat.
13.放2號艇。
14.Hoist No.2 lifeboat.
14.收2號救生艇。
15.Secure lifeboats.
15.固定救生艇。
16.Inflation cord of No.4 liferaft not secured on board.
16.4號救生筏的氣脹索綁扎不牢靠。
17.Replace lifcraft in next port.
17.在下一個港口替換救生艇。
